Smeg SLB510.1 - Manual (Page 6)

Instructions for Use 8
Insert the enclosed washers with filter into the loose ends of the hoses
and connect the red marked hose to hot water tap and the other hose
to cold water tap (fig. 6.1).
IMPORTANT
The highest allowed temperature of hot water is 60
°
C.
Water Outlet
Hook the outlet hose securely over the edge of the washbasin or bath
tub. The outlet hose can also be connected directly to the plumbing
outlet, the diameter of which should be not less than 4 cm (fig. 7).
Wall siphon drain must be correctly fitted in such manner to enable
cleaning.
If water is drained through a washbasin, always check it is drained
quickly enough, otherwise an overflow may occur or the machine may
pump the water back. Pull a string through the hole on the plastic knee,
and secure the outlet hose to prevent it from falling off (fig. 8).
7 8
6
6.1
hot cold