StarTech.com PEX2EC35 - Manual (Page 8)

Instruction Manual
5
Connect the DVI like Expansion Cable (currently connected to the
ExpressCard Bay) to the PCI Express Card.
Connect the remaining ends of the power cables (currently connected
to the power port on the back of the ExpressCard Bay).
Connect the remaining end of the USB Type-B-to-10-pin-Header
Adapter Cable to an available USB (Type A) port, by threading it
through an open rear panel slot to an available (external) USB port.
Once the necessary connections have been made, close the computer 5.
case, and power on the computer. If you wish to install an Express-
Card at this time, please do so prior to booting up the computer.