Samsung HL-S6165W User Manual
Page 115
English - 115
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1
Unplug TV, then use a
screwdriver to remove the
screws.
2
Remove the Lamp cover.
3
Remove the Lamp cover duct
holding the locker and pulling
it out.
4
Remove the screw securing
the Lamp by using a
screwdriver.
5
Separate the Lamp from the
engine by holding the handle
and pulling it out.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
BP68-00586F-00Eng(114~119) 3/30/06 7:19 PM Page 115
See also other documents in the category Samsung Projectors:
- S27A350B (88 pages)
- HL-R5064W (96 pages)
- SPA600BX-ZA (43 pages)
- SP-F10 (92 pages)
- SP-L351 (78 pages)
- HL72A650 (195 pages)
- HL-R5668W (144 pages)
- HLN507W (46 pages)
- HL-R5087W (104 pages)
- SPL220WX-ZA (38 pages)
- HCN4727W (71 pages)
- HL-R5656W (96 pages)
- HC-R5245W (80 pages)
- SPP310MEMX-XAA (32 pages)
- HL61A750 (2 pages)
- HL-T6756W (76 pages)
- HL-$4676S (135 pages)
- HLM507W (88 pages)
- BP59-00140E-01 (60 pages)
- HCN5529W (84 pages)
- HL-R6767W (144 pages)
- HL-P6167W (16 pages)
- Tantus PCJ 614RF (58 pages)
- HL-P5663W (46 pages)
- HC P4741W (64 pages)
- HL-S5086W (131 pages)
- HC-R5251W (64 pages)
- SPP410MX-ZX (54 pages)
- SP2203XWX-ZA (60 pages)
- Tantus HCL 652W (67 pages)
- PCL5415R (67 pages)
- SP2553XWX-ZA (89 pages)
- HL-R4266W (108 pages)
- P63FP (117 pages)
- HCL5515W (67 pages)
- HCM4715W (67 pages)
- 1080p (6 pages)
- Projection Television (2 pages)
- HL-P5685W (91 pages)
- SP-D300B (39 pages)
- HL-S7178W (160 pages)
- HL-S5688W (164 pages)
- HL-S6187W (132 pages)
- SPP400BX-EN (36 pages)
- HL-R5677W (104 pages)