Snom 220 - Manual (Page 44)

Settings
44
Other settings require the editing of numbers or strings. This can be
done with the keypad of the phone. Digits are entered directly via the
keys and letters can be called up by pressing a key repeatedly. You can
toggle between lower case letters ("a") and upper case letters ("A") with
the * key.
Key mapping:
Moves the cursor to the left.
Moves the cursor to the right.
Deletes the character to the left of the
cursor.
Changes input mode to capital letters.
Changes input mode to small letters.
Changes input mode to numbers.
ENTER
Accepts the entry.
CANCEL
Aborts the changes.
Settings via Web Browser
It is usually more convenient to use a web browser to configure the
settings. The snom 220 has an integrated web server for this purpose. If
the phone is connected to a network that provides DHCP, it can be
immediately accessed via the browser after boot-up. If you do not want
to use DHCP, you must specify the IP address, netmask, gateway, DNS
domain, and DNS server statically to ensure correct operation.
Illustration 1: Web configuration
Start your web browser.
Enter the IP address of the phone as the URL (e.g. 192.168.0.100). If
you do not know the IP address, press the menu key and scroll to the
“About” submenu and press ENTER
.
On the left side you will find a selection menu.