Sherwood R-771 - Manual (Page 41)

ENGLISH
40
Press the CURSOR UP( )/DOWN( ) buttons to select the desired input source, then press
the ENTER button.
1
Press the CURSOR UP( )/DOWN( ) buttons to select the desired item.
2
• This menu allows you to make the various settings depending on how to use the input sources connected
to this receiver.
SETTING THE INPUT SETUP
When selecting the items other than NAME
• You should assign the connected DIGITAL INs to the desired of CD and VIDEO 1 ~ VIDEO 3.
(For details, refer to "CONNECTING DIGITAL INs and OUT" on page 8.)
• You can select the desired of OPT 1, OPT 2, COAX1, COAX 2 and ANALOG.
Note :
• In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are
selected, the digital audio signals can be heard from the same DIGITAL IN.
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
When selecting the DIGITAL AUDIO
Example) When selecting the VIDEO 1
Press the CURSOR LEFT( )/RIGHT( ) buttons to set the selected item as desired.
3
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
Note :
• Depending on the input source, some items other than
DC TRIGGER cannot be selected.