Samsung 400UXN - Manual (Page 94)

ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to
the transmitter setting becomes activated.
MENU → , → ENTER → , → ENTER → ENTER → [0~9]
MagicInfo
Available Modes
• PC / BNC / DVI
• AV
• S-Video
• Component
• HDMI
• MagicInfo
Note
• The operating system for this set only supports English so the other languages might be corrupted
on the screen.
• For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using
a separate USB keyboard.
• For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up
external devices only if the LCD Display turns on.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program
(MagicInfo) may stop. If you do unplug the cable, restart the system.
• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program
(MagicInfo) may stop.
Adjusting the LCD Display