Samsung 400UXN - Manual (Page 33)

- This fuction does not work for this LCD Display.
16. SOURCE
Changes the video source.
17. INFO
The current picture information is displayed in the top left corner
of the screen.
18. EXIT
Exits from the menu screen.
19. Up-Down Left-Right but-
tons Moves from one menu item to another horizontally, vertically or
adjusts selected menu values.
20. S.MODE
When pressing this button, the current mode is displayed at the
bottom centre of the screen. The LCD Display has a built-in high
fidelity stereo amplifier. Then press the button again to circle
through available preconfigured modes. ( Standard → Music
→ Movie → Speech → Custom )
21. STILL Press the button once to freeze the screen. Press it again to un-
freeze.
22. FM RADIO Turns the FM Radio on/off. In PC/DVI mode, sets the SOUND
to FM Radio. In general Video mode, selects FM Radio, and turns
off the screen. In areas where the signal is weak, noise may occur
during FM radio broadcasts.
- This fuction does not work for this LCD Display.
23. P.SIZE Press to change the screen size.
24. SRS
SRS
25. DUAL/MTS
DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote control
while watching TV.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo Mono Mono Manual Change
Stereo Mono ↔ Stereo
SAP Mono ↔ SAP Mono
- This fuction does not work for this LCD Display.
26. PIP
Every time you press the button, a PIP screen appears.
27. SOURCE
Changes the source of the PIP window signal.
28. SWAP Swaps the contents of the PIP and main image. The image in the
PIP window will appear on the main screen, and the main screen
image will appear in the PIP window.
Introduction