Samsung HT-Z320 - Manual (Page 66)

66
LISTENING TO rADIO
remote Control
Press the 1. TUNEr button to select the FM band.
Tune in to the desired station. 2.
Automatic Tuning 1 • : When the [,] button is
pressed, a preset broadcast station is selected.
Automatic Tuning 2
• : Press and hold the ,,.
button to automatically search for active
broadcasting stations.
Manual Tuning
• : Briefly press the ,,. button to
increase or decrease the frequency incrementally.
Main Unit
Press the 1. FUNCTION button to select the FM band.
Select a broadcast station 2. .
Automatic Tuning 1 • : Press the STOP ( ) button to select PrESET and then press the [,]
button to select the preset station.
Automatic Tuning 2
• : Press the STOP ( ) button to select MANUAL and then press and hold
the [,] button to automatically search the band.
Manual Tuning
• : Press the STOP ( ) button to select MANUAL and then briefly press
the button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
• Each time the button is pressed, the sound switches between STErEO and MONO.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
PrESETTING STATIONS
Example : Presetting FM 89.10 in the memory
Press the 1. TUNEr button to select the FM band.
Press the 2. ,,. button to select 89.10.
Press the 3. TUNEr MEMOrY button.
Press the 4. [ ,] button to select a preset number.
You can select between presets 1 and 15. •
5. Press the TUNEr MEMOrY button again.
6. To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the •
[ ,] button on the remote control to select
a channel.
radio