Samsung HCN436W - Manual (Page 45)

C HAPTER T HREE : TV O PERATION
3.21
O
P E R AT I O N
5
Press the CH button to
select “Time Zone”.
While “Time Zone” is select-
ed, then press the VOL+ or
VOL- to change the Time
zone.
Sequence: ATL., EAST, CEN.,
MTN., PAC., ALAS., HAW.
6
Press the CH button to
select “DST”(Daylight saving
time). While “DST” is select-
ed, press the VOL+ or VOL-
button to indicate “Yes” or
“No”.
The clock is set.
Press the MENU button to exit.
Auto Clock Set
Auto Clock Set : On
PBS Channel : ANT 3
Time Zone : EAST
DST : No
Auto Clock Set
Auto Clock Set : Off
PBS Channel : ANT 3
Time Zone : ATL.
DST : Yes
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable).
1
Press the TV/Video button.
You will switch between
viewing the signals coming
from equipment connected
to the TV’s A/V jacks, and the
TV signal.
When you connect equipment to the TV, you can choose between
the following sets of jacks : Video 1, Video 2, S-Video 1, Component 1,
Component 2, Component 3(option) or DVI on the TV’s rear panel, and
Video 3 or S-Video 2 on the TV’s side panel.