Sony UWP-C1/C2 - Manual (Page 21)

21
Battery indication
When you turn the power on, the battery condition is shown by the BATT
indication in the display section.
When the indication in column 4 starts to flash, replace the batteries with new
ones. Be sure to check the expiration date printed on the new batteries before
using them.
1 2 3 4
BATT indication Lights Lights Lights Flashes
Battery status Good Less than Less than Almost
50% charged 20% charged drained
Hand-held microphone
(UTX-H1)
1
Turn the grip in the direction of
the arrow to open the battery
compartment.
2
Align two new LR6 (size AA)
alkaline batteries with the polarity
markings and insert them into the
battery compartment.
3
Turn the grip in the direction
opposite to the arrow in step 1 to
close the battery compartment.
Note
If you open the battery compartment
during signal transmission, the noise
may occur. Be sure to turn the
microphone off before opening the
battery compartment.