Sanyo DP23845 - Manual (Page 12)

12 Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
➀
Input Key—Press to select the program
source to watch: TV signal or signal from a
DVD Player or other equipment you have
connected to the AV jacks.
➁
Number Keys—Two keys must be pressed
to select a channel.
Example: Press 0 then 6
to select channel 6. For cable channels 100
through 125, press and hold the 1 key until
C1– – appears. Then press the other two
numbers.
➂
Caption Key—(See page 17.)
➃
Menu Key—Use this key with the Cursor
▲▼ and – + keys (see
➄
) to navigate and
adjust features of the on-screen menu
system (see pages 14 ~ 16).
➄
Channel Scanning (CH
▲▼) and Volume
(VOL – +) Keys—Press to scan through the
channels in memory and to adjust the
volume.
➅
Mute Key—Press once to minimize the
volume. Press again to restore.
Note: When using the audio out jacks, this
key will not mute the sound.
➆
V-Guide Key—(See page 18 ~ 20.)
➇
Power Key—Press to turn TV on or off.
USING THE REMOTE CONTROL
➀
➁
➂
➃
➄
➈
➉
11
➠
Points toward TV
➅
➆
➇
■ Be sure batteries are installed correctly.
■ Point the remote control toward the TV. Objects between
the remote control may cause misoperation of the
remote control function.
■ Cannot select channel with number keys. Press “0” in
front of numbers 1~9. Example: Channel 05.
12
13