Sony TA-VE800G - Manual (Page 14)

14 GB
Preparing and Using the Remote
Registering a TV
Registering a Sony TV
If your Sony TV can be controlled by an infrared
remote, and it is connected to the amplifier by it’s AV 1
jack, IR code registration is unnecessary.
Registering a non-Sony TV
Complete the following procedure to set the amplifier
to turn on your TV automatically whenever you turn
on the amplifier.
Registration
1 Turn on the amplifier and the TV set.
Make sure the input selector on the TV set is set to
AV 1.
2
Click FUNCTION in the main menu.
3
Click TV SET.
4
Click OTHER TV (or click “Sony TV” for a Sony
TV).
If you are using a Sony TV
The IR codes are programmed automatically and
registration is complete (click RETURN or EXIT).
Before going to step 5, cover the IR sensor on the
TV to prevent accidental operation. Otherwise,
the on-screen display may be turned off during
the programming procedure.
5
Click START.
6
When “PUSH YOUR COMMANDER” appears on
the TV screen, press the button on the TV's remote
that corresponds to the highlighted control
button.
Programme the button used to turn ON your TV
(e.g., CH0, CH1, CH+, etc.) as “CHANNEL 0”.
EXIT
TV MONITOR SET
GRAPHIC POSITION
RETURN
TV IR SET Sony TV
OTHER TV
FUNCTION SELECT
VIDEO 1 DAT/MD
CD VIDEO 2
TUNER VIDEO 3
PHONO L D
TAPE SATL
MACRO 1 MACRO 2
EXIT TV SET
FUNCTION
+
–
VOL
ALL
OFF
USER SUB
S
O
U
N
D
) ( 0 p P = +
EXIT
TV MONITOR SET
GRAPHIC POSITION
RETURN
TV IR SET
START
Sony TV
OTHER TV
EXIT
TV IR SET
RETURN
TV IR SET CHANNEL 0
POWER OFF
PUSH YOUR COMMANDER
CODE CLEAR
WIDE TV DISPLAY MODE