Stanton C.504 - Manual (Page 18)

Synchronizing the effect time with the BPM
When an effect is activated and AUTO SYNC button is turned on (AUTO SYNC button lights blue),
using the Jog wheel or pressing and holding the SHIFT button then pressing the BPM button (BEAT
RANGE) can change the effect beat synchronized with the BPM. The effect beat parameter is
shown in the parameter display.
NOTE:
Another easy way to use effects is by using FX RANGE. Easily synchronize effects and toggle
through beat parameters by utilizing the FX RANGE button (Press and hold SHIFT + BPM = FX
RANGE). FX RANGE can only be used after an effect DELAY, FILTER, or FLANGER is selected.
Also, when scratch function is on (VINYL), the effect beat cannot be controlled with the Jog wheel.
Effect level setting (wet/dry)
When an effect is activated, pressing and holding the SHIFT button then pressing the activated effect
button enters the effect level setting mode. In this mode, using the Jog wheel can change the effect
level. The effect level parameter is shown in the parameter display.
DELAY
Pressing the DELAY button activates the Delay effect.
Effect time: 1msec to 3,500msec (default: 500msec)
Effect beat: 2, 1, 3/4, 1/2, 1/4 (default: 1)
Effect level: 0 to 100 (default: 50)
FILTER
Pressing the FILTER button activates the Low pass filter effect.
Effect time: 10msec to 16sec (default: 2sec)
Effect beat: 32, 16, 8, 4, 2, 1, 1/2 (default: 4)
Effect level: 0 to 100 (default: 50)
NOTE:
Filter effect has two operation modes, manual mode and auto mode.
In manual mode, filter frequency can be controlled with the Jog wheel.
In auto mode, filter frequency is moved automatically followed by BPM and effect beat parameter.
Pressing and holding the FILTER button more than 1.5 seconds changes the filter effect mode.
When filter effect mode is set to manual mode, you can move the filter frequency using with the Jog
wheel even if the scratch function is activated.
FLANGER
Pressing the FLANGE button activates the Flanger effect.
Effect time: 10msec to 16sec (default: 500msec)
Effect beat: 32, 16, 8, 4, 2, 1, 1/2 (default: 1)
Effect level: 0 to 100 (default: 50)
3-2. KEY Shift
When pitch range is set to +/-4, 8, or 16%, pressing the KEY SHIFT button turns on and off the KEY