Stanton C.504 - Manual (Page 14)

59. Parameter display
Displays the various parameters.
60. TAP indicator
Lights when parameter display shows the tap value.
61. BPM indicator
Lights when parameter display shows the auto BPM value.
62. DIR indicator
When a MP3 CD-ROM disc is inserted, this indicator lights and parameter display shows the current
selected directory number.
63. KEY LOCK indicator
Lights when KEY LOCK function is activated.
2-1. CUE
The C.504 will always memorize the last played start point as the main cue point. After play has
begun, pressing the CUE button re-locates the audio and plays it from that point. Although very
quick, the CUE button is not seamless.
NOTE:
You cannot create a new cue point with this button. To create a new cue point, simply find the desired
location and press PLAY. The last location when play was pressed is now the current the cue point.
This can be done with or without stutter mode (using jog wheel or search buttons).
Stutter play with the CUE Button
Once a CUE point has been created, the unit will play when this button is pressed, and enter pause
mode when CUE button is released. If the PLAY button is pressed during CUE playback, the unit will
go into normal play mode.
2-2. MEMORY/CUE
The C.504 can have three flash (seamless) cue points stored with the CUE 1-3 buttons. These other
cue points can be done “on-the-fly” (without pressing play or pausing the audio) or in stutter mode
(using the Jog Wheel or Search buttons)
To memorize the CUE 1-3 points
1. Press MEMORY/CUE button to enter the unit into MEMORY/CUE mode (if not already lit this but-
ton will light up green.
PLAYBACK OPERATION