Sharp CD-BA120 User Manual

Page 8

SOUND CONTROL

■

Volume

Press the VOLUME button to increase the volume and the
VOLUME button to decrease the volume.

30 MAXIMUM

.....

■

Extra bass (X-BASS)/Pre-programmed
equalizer

(Main unit operation)

You can select the extra bass and pre-programmed equalizer
modes with the same button on the main unit.

FLAT (X-BASS on)

ROCK (X-BASS on)

POPS (X-BASS on)

JAZZ (X-BASS on)

CLASSIC (X-BASS on)

VOCAL (X-BASS on)

VOCAL (X-BASS off)

CLASSIC (X-BASS off)

JAZZ (X-BASS off)

POPS (X-BASS off)

ROCK (X-BASS off)

FLAT (X-BASS off)

Changing the mode:

When the EQUALIZER/X-BASS/DEMO button is pressed, the cur-
rent mode setting will be displayed. To change to a different
mode, press the EQUALIZER/X-BASS/DEMO button.

(Remote control operation)

FLAT

ROCK

POPS

JAZZ

CLASSIC

VOCAL

To enter and cancel the extra bass mode:

When the power is first turned on, the unit will enter the extra
bass mode which emphasizes the bass frequencies, and "X-
BASS" will appear.
To cancel the extra bass mode, press the X-BASS button.
"X-BASS" will go out.

Selecting a pre-programmed equalizer mode:

When the EQUALIZER MODE button is pressed, the current
mode setting will be displayed. To change to a different mode,
press the EQUALIZER MODE button repeatedly.

FLAT: The sound is not modified.
ROCK: Bass and treble are emphasized.
POPS: Bass and treble are slightly emphasized.
JAZZ: Treble is cut a little.
CLASSIC: Treble is reduced a lot.
VOCAL: Vocals (midrange tones) are emphasized.

(Main unit)

(Remote control)

CD-BA120(SEC) TINSE0299AWZZ