Sharp CD-BA120 User Manual

Page 6

(Continued)

■

Connecting the AC power cord

Connect the AC power cord to the AC INPUT jack, then connect
the AC power cord plug to an AC outlet.

Notes:

●

Unplug the AC power cord from the AC outlet if the unit will
not be in used for a prolonged period of time.

●

Never use a power cord other than the one supplied. Use of
a power cord other than the one supplied may cause an
electric shock or fire.

■

Demo mode

When the AC power cord is first connected, the unit will enter
the demonstration mode.

To cancel the demonstration mode:

When the unit is in the stand-by mode (demonstration mode),
press the EQUALIZER/X-BASS/DEMO button.

●

The demonstration mode will be canceled, the display will dis-
appear.

To return to the demonstration mode:

When the unit is in the stand-by mode, press the EQUALIZER/X-
BASS/DEMO button again.

Note:

●

When the power is on, the EQUALIZER/X-BASS/DEMO button
can be used to select the extra bass mode or any of the pre-
programmed equalizer modes.

■

Remote control

●

When inserting or removing the batteries, push them toward
the

battery terminals.

●

Installing the batteries incorrectly may cause the unit to mal-
function.

Precautions for battery use:

●

Insert the batteries according to the direction indicated in the
battery compartment.

●

Replace all old batteries with new ones at the same time.

●

Do not mix old and new batteries.

●

Remove the batteries if they are weak or if the unit will not
be used for long periods of time. This will prevent potential
damage due to battery leakage.

Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Notes concerning use:

●

Replace the batteries if the operating distance is reduced or if
the operation becomes erratic.

●

Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.

●

Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.

●

Keep the remote control away from moisture, excessive heat,
shock, and vibrations.

AC 120 V, 60 Hz

To an AC outlet

To AC INPUT

(Main unit operation)

●

2 "AA" size batteries (UM/SUM-3, R6, HP-7 or
similar)

●

Batteries are not included.

8" - 20’
(0.2 m - 6 m)

CD-BA120(SEC) TINSE0299AWZZ