Samsung SADT-100EC - Manual (Page 3)

_SADT-100EC
. Install two anchor bolts (B1,B2) on the concrete ceiling.
 Insert the anchor bolt (B1) into the Ø219 hole.
- Determine the length of the anchor bolt (B1) using the template B (accessory).
- Apply a nut (N1) to the anchor bolt(B1) using template B (accessory) and determine
the location.
 Tighten another anchor bolt (B2) as shown on the following drawing.
3. Install the safety wire to the anchor bolt (B2) in the following sequence.
 Apply a nut (N2) to the anchor bolt (B2).
 Insert the safety bracket 1(supported) into the anchor bolt(B2).
 Apply two nuts (N3,N4) to the anchor bolt (B2).
 Hook and insert a safety wire into the safety bracket1.
 Put up and fit the opposite end of the safety wire onto the safety bracket 2 for the
ceiling mount adaptor.
CONCRETE
ANCHOR BOLT
CEILING B/D
TEMPLATE B
“B2” “B1”
“N1”
SAFETY
BRACKET 1
SAFETY BRACKET 1
SAFETY WIRE
CEILING B/D
SAFETY BRACKET 2
CEILING MOUNT ADAPTOR
“N2”
“N3”
“N4”
“B2” “B1”
“N1”
SADT-100EC_ENG.indd 2 2008-01-23 오후 4:14:37