Sherwood SD-860 - Manual (Page 35)

35
NORMAL : Select this to adjust the black level of the video signal to
the standard level.
DARKER : Select this to adjust the black level darker.
BLACK LEVEL NORMAL
DARKER
When selecting the BLACK LEVEL
• You can select the desired black level to adjust the intensity of black.
Note :
• Only when the video signal format is NTSC color system, the black level setting is effective for the video signals(other than the
RGB signals(Regional Option for Europe, etc., and the progressive component video signals).
Continued
To return to the main setup menu screen
• Press the CURSOR button to select the item menu, press the CURSOR / buttons to select “MAIN PAGE” and press
the ENTER button.
Then the main setup menu screen will be displayed.
• When the RETURN button is pressed, the main setup menu screen will be displayed, too.
5
Set other setups to your preference.
4
Press the CURSOR button to select the item menu.
• Each time the CURSOR or button is pressed, the
setting menu or the item menu is selected.
• The selected setting is colored.
• Each time the CURSOR or button is pressed, the
item menu or the setting menu is selected.
2
Press the CURSOR button to select the setting menu.
3
Press the CURSOR / buttons to select the preferred, then press the ENTER button.
RC RC
RC
RC