Sherwood SD-860 - Manual (Page 28)

28
• Some DVDs contain scenes which have been shot simultaneously from multiple camera angles.
For these discs, the same scene can be viewed from each of these different angles.
• The recorded angles differ depending on the disc used.
• During playback at the scene recorded from multiple camera angles, press the ANGLE button.
• During playback at the scene recorded from multiple camera
angles, the angle symbol( ) is displayed on the TV
screen only when the ANGLE MARK is set to ON.(Refer to
“When selecting the ANGLE MARK” on page 43.)
• Each time this button is pressed, the angle changes as follows:
Example)
Note : This function works only at scenes recorded from multiple angles.
To select a zoom scale
• In the zoom on mode,
• Each time the button is pressed,
zoom scale changes as follows
025 PCT 050 PCT 100 PCT 150 PCT 200 PCT
zoom-out mode zoom-in mode
CHANGING THE CAMERA ANGLE
Selected angle number
Total number
ZOOMING IN/OUT A SCENE
During playback or in the still
picture or the pause mode,
press the ZOOM button.
1
• Each time this button is pressed, zoom scale or zoom
mode changes as follows:
• The unit zooms in to the center part of the scene.
ZOOM X1.5 ZOOM X2 ZOOM X3 ZOOM OFF
Zoom-in mode Zoom playback off mode
ZOOM X2 ZOOM OFF
Zoom-in mode Zoom playback off mode
ZOOM ON ZOOM OFF
• To return to the previous operation status, press the
ZOOM button repeatedly until the zoom playback is
canceled.
Notes:
• The zoom function may not work with some discs or files.
• The zoom function may not work properly at some
scenes.
• Zooming is not possible at a title or DVD menu, etc.
Only while zooming in a scene,
press the CURSOR
/ / /
buttons to select the desired
part of the scene.
2
• In the zoom-in mode only, you can select and view any part of the scene close-up.
RC
RC
RC
RC