Sennheiser BW 900 - Manual (Page 11)

Setting up the BW 900 system
11
Adjusting the BW 900 to your office phone
To ensure optimum intelligibility, adjust the BW 900 system to your
phone as follows:
f
Press the headset/handset switch
³
to the “down” position.
The connection to the headset can be established.
f
Put on the headset and adjust it for comfort.
f Press the headset hook button
ብ
or the base station hook button
·
.
A wireless link is established between the headset and the base sta-
tion.
f Pick up the phone handset from its cradle.
f
Adjust the telephone adjustment switch
¸
so that the dial tone can
be heard loud and clear in the headset.
f Turn the microphone volume knob
µ
to position 1.
f
Make a test call to someone while adjusting the microphone sensitiv-
ity.
f
Speak to the other party by alternately using the handset (head-
set/handset switch
³
is in the “up” position) and the headset (head-
set/handset switch
³
is in the “down” position), always starting with
the handset.
f
Turn the microphone volume knob
µ
so that the other party can hear
you at a comfortable level, whether you use the headset or the hand-
set.
f Hang up the phone and press either the headset hook button d or the
base station hook button B.
Connecting the headset to other Bluetooth devices (pairing)
The headset is capable of being paired with up to three Bluetooth de-
vices:
• one base station (cannot be changed)
• one mobile phone (can be changed for another mobile phone)
• one PC or one PDA (can be changed for another PC or PDA, respec-
tively)
The Bluetooth devices must feature a “hands free profile” and “headset
profile”.
Notes:
As soon as you pair for example a new mobile phone, the old mobile
phone is no longer detected.
Certain features like redialling and voice dialling are only possible if
supported by the Bluetooth device.
f Make sure the headset is turned on and placed close to your Bluetooth
device.
f
Set your Bluetooth device to Bluetooth pairing mode (see the manual
of your Bluetooth device).
f
Press and hold down both the headset hook button
ብ
and the multi
switch
ቤ
(in “push” direction) until the headset LED
ቧ
starts flashing
blue and red alternately.
The headset is in pairing mode.
Note:
If pairing is not successful within 60 seconds, the headset returns
automatically to standby mode.
³
·
¸
µ
4 Sec.