Shindaiwa EB633RT - Manual (Page 21)

21
Eng
lish
Store unit in a dry, dust free place, out of the reach of
children.
DANGER
Do not store in enclosure where fuel fumes may ac-
cumulate or reach an open flame or spark.
Place the stop switch in the "STOP" position.
Remove accumulation of grease, oil, dirt and debris from
exterior of unit.
Perform all periodic lubrication and services that are
required.
Tighten all screws and nuts.
Drain the fuel tank completely and pull the recoil starter
handle several times to remove fuel from the carburetor.
1.
2.
3.
4.
5.
6.
s
ToraGe
WARNING
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust
area clear of flammable debris during transportation or when storing, otherwise serious property damage or
personal injury may result.
Long Term Storage (Over 30 Days)
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte-
nance which includes the following:
Remove the spark plug and pour 7cc (1/4 oz.) of fresh,
clean Shindaiwa 2-stroke engine oil into the cylinder
through the spark plug hole.
A. Place a clean cloth over the spark plug hole.
B. Pull the recoil starter handle 2-3 times to distribute
the oil inside the engine.
C. Observe the piston location through the spark
plug hole. Pull the recoil handle slowly until the
piston reaches the top of its travel and leave it
there.
Install the spark plug (do not connect ignition cable).
Remove blower pipe assembly from unit.
7.
8.
9.