Sony Trinitron KV-14V4D - Manual (Page 19)

Basic Operations 19
GB
This section shows you how to insert a cassette and to play it. More
convenient functions you can use while playing a tape is shown in
“Additional Operations” from page 31.
Inserting a Video Cassette
1 Press ;, PROGR +/– or number buttons on the Remote Commander, or
PROGR +/– on the video TV when the u lamp is lit in red.
2 Open the front panel on the video TV.
3 Gently press the centre of the front side of a cassette with the arrow
indication facing upwards. The cassette is automatically loaded into the
cassette compartment.
The Ò indicator appears on the screen and stays until the cassette has
been loaded.
The video TV turns on automatically when it is in standby mode. If you
insert a cassette with its safety tab removed, playback starts.
Ejecting a Video Cassette
Press EJECT 6 on the video TV or 6 on the Remote Commander.
The Ò indicator appears and stays until the cassette is ejected.
You can eject the cassette even if the power is off.
Protecting Your Cassette against
Accidental Erasure
The cassette is provided with a safety tab to protect against accidentally
erasing a previous recording. Break off the safety tab with a screw driver
or a similar tool.
If the safety tab is removed, the cassette is ejected when you try to record
on it.
To record on a cassette with the safety tab broken off, simply cover the tab
hole with adhesive tape.
Playing a Tape
Adhesive tape
Safety tab
ON TIMER
SLEEP
SHOW VIEW
ONCE
DAILY
WEEKLY
REC
PAUSE
CLEAR
TIMER ON
SCREEN
QUICK
TIMER COUNTER
RESET
TIMER REC
ON/OFF
REW FF
STOP
PLAY
1 2 3
4 5 6
7 8 9
÷ 0
MENU
OK
PROGR