Sony CDX-CA750X - Manual (Page 19)

19
E:\DATA\01_18\876173S CDX-CA760X
(U)\3228169111\322816911CDXCA750U\01US02CD-U.fm masterpage:Right
CDX-CA760X/CA750X
3-228-169-11(1)
• A.Scrl (Auto Scroll)
– Select “on” to scroll all automatically
displayed names exceeding 8 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
Sound
• HPF (High pass filter) — to select the cut-off
frequency to “off,” “78 Hz,” or “125 Hz.”
• LPF (Low pass filter) — to select the cut-off
frequency to “78 Hz,” “125 Hz,” or “off.”
• Loud (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
Play Mode
• Local on/off (Local seek mode) (page 14)
– Select “on” to only tune into stations with
stronger signals.
• Mono on/off* (Monaural mode) (page 14)
– Select “on” to hear FM radio/TV stereo
broadcast in monaural. Select “off” to return
to normal mode.
• IF Auto/Wide (page 14)
* This function cannot change the TV sound setting if
the optional TV tuner XT-40V is connected.
1
Press (MENU) .
To set A.Scrl, press (MENU) during CD/MD
playback.
2
Press either side of (DISC/PRESET)
repeatedly until the desired item
appears.
3
Press the (+) side of (SEEK) to select
the desired setting (Example: “on” or
“off”).
4
Press (ENTER) .
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing
either side of
(DISC/PRESET) for 2 seconds.
Setting the equalizer
You can select an equalizer curve for seven
music types (Vocal, Club, Jazz, New Age, Rock,
Custom, and Xplod).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(radio, CD, MD, or TV).
2
Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select “off.”
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1
Press (MENU) .
2
Press either side of (DISC/PRESET)
repeatedly until “EQ7 Tune” appears,
then press
(ENTER) .
3
Press either side of (SEEK) to select
the desired equalizer curve, then
press
(ENTER) .
Each time you press (SEEK), the item
changes.
4
Select the desired frequency and level.
1 Press either side of (SEEK) to select
the desired frequency.
Each time you press (SEEK), the
frequency changes.
62 Hz y 157 Hz y 396 Hz y 1.0 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
continue to next page t