Sony CDX-CA750X - Manual (Page 11)

11
E:\DATA\01_18\876173S CDX-CA760X
(U)\3228169111\322816911CDXCA750U\01US02CD-U.fm masterpage:Right
CDX-CA760X/CA750X
3-228-169-11(1)
Labeling a CD
— Disc Memo (For a CD unit with the
CUSTOM FILE function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 12).
Caution
Do not use the CUSTOM FILE feature while
driving, or perform any other function which
could divert your attention from the road.
1
Start playing the disc you want to label
in a CD unit with the CUSTOM FILE
function.
2
Press (MENU) , then press either side
of (DISC/PRESET) repeatedly until
“Name Edit” appears.
3
Press (ENTER) .
The unit will repeat the disc during the
labeling procedure.
4
Enter the characters.
1 Press the (+) * 1 side of
(DISC/PRESET) repeatedly to select
the desired character.
A t B t C ... t 0 t 1 t 2 ... t +
t – t * ... t * 2 t A
*1 For reverse order, press the (–) side of
(DISC/PRESET) .
*2 (blank space)
2 Press the (+) side of (SEEK) after
locating the desired character.
If you press the (–) side of (SEEK), you
can move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
To return to normal CD play mode,
press
(ENTER) .
Tips
• Simply overwrite or enter “
” to correct or erase a
name.
• There is another way to start labeling a CD: Press
(LIST) for 2 seconds instead of performing steps 2
and 3. You can also complete the operation by
pressing
(LIST) for 2 seconds instead of step 5.
• You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with a
CD unit that has the function. The Disc Memo will be
stored in the memory of the CD unit with the
CUSTOM FILE function.
Note
Repeat/shuffle play is suspended until the Name Edit
is complete.
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT information.
Tip
To find out about other items that can be displayed,
see page 10.
Erasing the Disc Memo
1
Press (SOURCE) repeatedly to select
“CD.”
2
Press (MODE) repeatedly to select the
CD unit storing the Disc Memo.
3
Press (MENU) , then press either side
of (DISC/PRESET) repeatedly until
“Name Del” appears.
4
Press (ENTER) .
The stored names will appear.
5
Press either side of (DISC/PRESET)
repeatedly to select the disc name you
want to erase.
The stored names will appear.
6
Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (MENU) twice.
The unit returns to normal CD play mode.
Notes
• When the Disc Memo for a CD TEXT disc is erased,
the original CD TEXT information is displayed.
• If you cannot find the Disc Memo you want to erase,
try selecting a different CD unit in step 2.
To Press
View (DISPLAY) during CD/CD
TEXT disc playback