Sim2 Multimedia Grand Cinema RTX 55TV - Manual (Page 12)

12
4 OPERATION OF THE APPLIANCE IN TV MODE
This chapter describes the operation of the RTX 55TV as a
TELEVISION RECEIVER.
No reference is made here to the various functions and possi-
bilities of the appliance when used as a graphic monitor (see
subsequent chapters for this type of information).
THE REMOTE CONTROL
The remote control uses infra-red light to send signals to the
television.
Accordingly, avoid placing obstacles between the remote control
and the infra-red sensor; these could prevent the remote control
from operating effectively. The remote control requires two 1.5
V batteries, size AAA.
Insert the batteries through the back of the handset, being
careful to observe the polarity as indicated inside the pocket
(Fig. 4). Each button of the remote control performs more than
one function, depending on the mode in which the appliance
is operating.
The mode is determined by whatever appears on the screen at a
given moment; the RTX 55TV can operate in TELEVISION (TV)
mode (displaying a picture from a television channel or an exter-
nal appliance); it can also operate in OSD mode (displaying one
of the On Screen Display menus) and in TXT mode (displaying
Videotext). The tables on the following pages summarise the
various functions of the remote control buttons.
Fig. 4
1,5V type AAA
[ 2 ]
[ 6 ]
[ 7 ]
[ 8 ]
[ 20 ]
[ 9 ]
[ 19 ]
[ 21 ]
[ 22 ]
[ 23 ]
[ 25 ]
[ 24 ]
[ 10 ]
[ 11 ] [ 18 ]
[ 12 ] [ 17 ]
[ 13 ] [ 16 ]
[ 14 ] [ 15 ]
[ 3 ]
[ 1 ]
[ 4 ]
[ 5 ]
Fig.5 Fig.4