SIIG 04-0629A - Manual (Page 10)

10
Windows ME / 98SE / 98 / 95
1.
Right click My Computer, click Properties, click
Device Manager.
2. Double click Ports (COM & LPT), and one M65-PCI
ECP Parallel Port... two M65-PCI Serial Port...
should be listed.
DOS
1. Insert the driver CD. From the C:\> prompt, type
copy D:\dos\*.*, and press Enter. (Change D: to
match your CD-ROM drive letter)
2. Type edit autoexec.bat, and press Enter.
3. Add C:\Gemdosin.exe -a -r at the bottom of the
Autoexec.bat file.
4. Go to File, save the changes and exit.
5. Restart your system for the new setup to take effect.