Samsung Digimax A55W - Manual (Page 14)

14
Connecting to a Power Source
Battery status
Battery indicator
The battery is fully
charged
Prepare new battery
There is no battery capacity.
Replace with new battery.
There are 4 indicators for battery condition that are displayed on the LCD monitor.
When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
INFORMATION
Using the batteries
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+/ -).
2. Insert the batteries taking note of the
polarity (+/ -).
3. To close the battery chamber cover, push it until it clicks.
1. Open the battery chamber cover by pushing in the direction of the
arrow.
[ Inserting the AA type battery ] [ Inserting the CR-V3 type battery ]