SUPER MICRO Computer SUPER X7DB8 - Manual (Page 123)

Appendix D: The Adaptec HostRAID Setup Guidelines
D-17
To format a disk:
*Note: The operation of Formatting Disk allows you to perform a low-level
formatting of a hard drive by writing zeros to the entire disk. Serial ATA drives
are low-level formatted at the factory and do not need to be low-level formatted
again.
3 When the screen shown below displays, select Format Disk and press
ter>. The following screen appears:
4 Read the warning message when it appears in the screen as shown below. To
continue with disk formatting, select Yes and hit . Otherwise, select No
and press .
(* Caution : Formatting a disk destroys all data on the drive. Be sure to back up
your data before formatting a disk.)