SUPER MICRO Computer SUPER X7DB8 - Manual (Page 118)

D-12
X7DB8/X7DBE User's Manual
Adding/Deleting Hotspares
To add a Hotspare:
(*Note: In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add a
new HDD as a hotspare.)
1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.
4. Use the up and down arrow keys to highlight and select the disk you want to
designate as a hotspare, and press , and then, press <Enter>.
5. Press Yes when the following prompt is displayed:
"Do you want to create spare?" (Yes/No?)
The spare you have selected will appear in the Selected drives Menu.
To delete a Hotspare:
1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.
2. Use the up and down arrow keys to highlight and select the Hotspare you
want to delete, and press , and then, press .
3. When the following warning is displayed: "Do you want to delete the hot
spare?" (Yes/No?), press Yes to delete the hotspare you have selected.