Audio, Setup, Speaker setting – Samsung HT-C6730W User Manual
Page 34: English, Audio distance, Test tone, Dpl llz, Level

34
English
Setup
Audio
Distance
If the speakers cannot be placed at equal
distances from the listening position, you can
adjust the delay time of the audio signals from the
front, center, surround, surround back and
subwoofer speakers.
You can set the Speaker Distance between
1ft(0.3m) and 30ft(9.0m).
Display
Audio
System
Network
Language
Security
General
Support
Settings
Distance
Front L
:
◄
10ft (3.0m)
|
Front R
: 10ft (3.0m)
Center :
10ft
(3.0m)
Surround L
:
10ft (3.0m)
Surround R
:
10ft (3.0m)
Surround Back L : 10ft (3.0m)
Surround Back R :
10ft (3.0m)
Subwoofer :
10ft
(3.0m)
Test Tone
:
Off
Test Tone
Use the Test Tone feature to check the speaker
connections.
Press the ◄, ► buttons to select All.
A test tone will be sent to Front Left
Center Front Right Surround Right
Surround Back L Surround Back R
Surround Left Subwoofer in order so you can
make sure the speakers are set up correctly.
To stop the test tone, press the ◄, ► buttons to
select Off.
Display
Audio
System
Network
Language
Security
General
Support
Settings
Speaker Setting
DPL IIz : Off Level Distance Test Tone : ◄ All | Listen to the emitted sound from all speakers in sequence. NOTE When HDMI Audio is ON (audio is produced • • ✎ Speaker Setting DPL llz Off : Select when you place the Surround Back Level You can adjust the balance and level for each Adjusting Front/Center/Surround • The volume level can be adjusted in steps from +6dB to -6dB. • The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. • • Display Audio System Network Language Security General Support Settings Level Front L : ◄ 0 dB | Front R : 0 dB Center : 0 dB Surround L : 0 dB Surround R : 0 dB Surround Back L : 0 dB Surround Back R : 0 dB Subwoofer : 0 dB Test Tone : Off Set the speaker level to obtain the best possible surround sound. Display Audio System Network Language Security General Support Settings Speaker Setting s Select r Return DPL IIz : ◄ Off | Level Distance Test Tone : Off Set the speaker level and distance to obtain the best possible surround sound. Set the parameters of the distance from the listening position to the speakers. HT-C6730W_XAC_0203.indd 34 HT-C6730W_XAC_0203.indd 34 2010-02-03 1:36:04 2010-02-03 1:36:04
through TV speakers), the Test Tone
function is not available.
speakers as shown.
On: Provide a more realistic 3D surround
sound with vertical surround system.
speaker.
/Surround Back/Subwoofer Speaker Level