Speco Technologies FCCE VGA19LCD - Manual (Page 67)

3
Risk of electric shock – Do not open
To reduce the risk of electric shock, do not remove the back cover. There are no
user-serviceable parts inside.
Removing the back cover voids the warranty.
Have your LCD repaired by qualified service personnel only.
Warnings and precautions
l
Do not place your hands, face, or objects close to the ventilation openings of you LCD.
The top of your LCD gets very hot from exhaust air that is released through the
ventilation openings. Burns or personal injuries may occur if you are too close the LCD.
Damage may occur if you place any object near the top of your LCD.
l Disconnect all cables before moving you LCD. Moving you LCD with its cables attached
may damage the cables and cause fire or electric shock danger.
l Do not expose you LCD to rain or moisture.
l Keep your LCD away from excessive dust, high temperatures, moisture, or direct
sunlight.
l Use your LCD in a well-ventilated area and do not cover the ventilation openings.
l Do not modify your LCD or use an unshielded power cord or video input source cable, or
you may experience excessive interference.
l Disconnect your LCD and unplug the power cord when the LCD is not used for a long
period of time.
l If the picture displayed is in any way abnormal, turn off your LCD, then disconnect it from
the electrical outlet. Make sure that your video input source cable is connected correctly,
then reconnect your LCD to the electrical outlet.
l Disconnect your LCD from the electrical outlet before cleaning or performing
maintenance. Do not use liquid or aerosol cleaners. Use only a slightly damp cloth for
cleaning.
l Do not place your LCD on an unstable cart, stand, or table. Your LCD may fall, causing
serious damage.
Important safeguards