Sony 3-289-204-42(3) - Manual (Page 91)

91 GB
D:\NORM'S JOB\SONY HA\SO0054\STR-DA2400ES\CEL VERSION\3289204423\04GB-
STRDA2400ESUC\090OTH_GB.fm masterpage: Right
STR-DA2400ES
3-289-204-42(3)
Oth
e
r Op
eratio
ns
About the indicators on the display window
Name Function
A SW Lights up when subwoofer
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the LFE signal in the disc
being played back or the
low frequency components
of the front channels.
B LFE Lights up when the disc
being played back contains
an LFE (Low Frequency
Effects) channel and the
LFE channel signal is
actually being reproduced.
Since the LFE signal is not
recorded in all parts of the
input signal the bar
indication will fluctuate
(and may turn off) during
playback.
C COAX Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the COAXIAL jack
or when INPUT MODE is
set to “COAX” (page 87).
D OPT Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the OPTICAL jack
or when INPUT MODE is
set to “OPT” (page 87).
E ; D/
; D EX/
; D+/
; TrueHD
“; D” lights up when the
receiver is decoding Dolby
Digital signals.
“; D EX” lights up when
the receiver is decoding
Dolby Digital Surround EX
signals.
“; D+” lights up when the
receiver is decoding Dolby
Digital Plus signals.
“; TrueHD” lights up
when the receiver is
decoding Dolby TrueHD
signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to “AUTO” (page 87).
F Neural-THX Lights up when the receiver
applies Neural-THX
processing to input signals.
Name Function
continued