SanDisk MP3 Player - Manual (Page 45)

45
6.2. Programming FM Presets
You can program up 40 preset stations. There are two ways to program presets:
Manually – Presets
1. From the main menu, select Radio.
2. Slide your finger or tap up or down on the touchpad to select desired frequency.
3. Press and hold Select button while listening.
4. A frequency that been defined as preset will be marked with a small star next to it.
Automatically – Presets
1. From the main menu, select Radio.
2. Anywhere on the radio dial, hit Select again (tap center of navigation pad) to open the
radio Options screen.
3. Scroll down and select “Auto Scanning for Presets”. The device will seek out, find, and
bookmark up to 40 of the strongest signal strength stations in your area.
4. A frequency that been defined as preset will be marked with a small star next to it.
To access your presets quickly, select Radio, then swipe to the second “page of the book”
under this menu to see the pre-sets you currently have programmed.
6.3. Radio Options/Recording
Your Sansa Fuze+ player options include adding/deleting presets, recording a program,
pausing a program while recording it, and deleting a recorded program.
Press the Select button while listening to radio to enter the Radio Options menu. The
following options are available:
1. Delete Preset
2. Record Radio
3. Play Recordings
4. Auto-scanning for Presets
5. Seek Mode – can be toggled on/off
6. Delete All Presets
7. Delete All Radio Recordings