Smeg S2773CXU - Manual (Page 9)

Instructions for the Installer
11
NOTE: Use this method only if local codes allow connecting the cabinet ground conductor to the neutral
wire of the power supply cord
WARNING
WARNING
ELECTRIC SHOCK HAZARD
- Turn power supply off before connecting wires.
- Electrically ground the range.
- Failure to follow these instructions can results in death, fire, or electrical
shock.
- Improper connection of the device-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if
you are in doubt as to whether the appliance is properly grounded. Do
not modify the power supply cord. If it will not fit in the outlet, have a
proper outlet installed by a qualified electrician.
Refer to
picture 1, where local codes allow the
connection of the applliance's ground wire to the
branch circuit neutral wire (white colored wire):
- The ground wire must be connceted first;
- If local codes permit, connect the green or
yellow-green ground wire from the appliance
and the white wire from the appliance to the
branch circuit neutral wire (white colored wire).
- Connect the red and gray leads from the
cooktop to the junction to the corresponding
leads in the junction box.
pic.1)
Refer to
picture 2,
- The ground wire must be connceted first;
- Connect the green or yellow-green ground wire
from the appliance to the ground in the junction
box (green colored wire). Do not connect the
grounding wire to the neutral wire in the
junction box.
- Connect the red and gray leads from the
appliance to the corresponding leads in the
junction box.
- Connect the white wire from the appliance to the
neutral (white colored) wire in the junction box.
pic.2)
NOTE: Both power cables coming out of the cooktop, must be connected according to the diagrams
shown in pictures 1 and 2