Samsung HT-AS730S - Manual (Page 43)

E
N
G
●
S
et
U
p
SUrrOUnD SetUp (Continued)
Setting tone Control
This will enable you to adjust the bass and treble level.
Press SETUP/MENU button.
“INPUT” appears on the display and goes into Setup Mode.
Press ▲▼ button to select "SURROUND", and then press the
ENTER.
Press ▲▼ button to select "TONE CONTROL", and then
press the
ENTER or ▶ button.
Press ▲▼ button.
Each time you press this button, TONE SET  BASS 
TREBLE will be selected in turn.
If it is set to TONE: OFF, the Tone Control function will be
disabled..
Press ▲▼ button to set the TONE CONTROL you want.
You can adjust it from -6 to +6dB by 1 step.
The sound gets smaller at -6dB and louder at +6dB.
- to exit setup mode -
Press SETUP/mEnU, ExiT or RETURn button.
“SETUP OFF” appears on the display and Setup Mode is exited.
The Tone Control function can be applied to all channels except for the subwoofer.
You can also press TEST TONE button on the remote control to use this function.
1.
~
2.
3.
3.
~
~
5.
~
~
~
M
`
`



HT-AS730S-XAA_0204.indd 43 2009-02-05 �� 11:47:56