Setting the recorded pixels and quality level, Information – Samsung Digimax GX-1S User Manual
Page 113
ŝ112Ş
Setting the Recorded Pixels and Quality Level
4. Use the four-way controller (ƌ) to select (Manual).
5. Press the four-way controller (Ȟ).
- The message screen appears.
6. Fully display a white or grey sheet of paper in the viewfinder under the light to adjust white balance.
7. Press the shutter release button fully.
- Slide the focus mode lever to when the shutter cannot be released.
[OK] appears on the LCD monitor when setting is completed.
[NG] appears when setting is not completed successfully.
8. Press the button.
ƃ No image is recorded when the shutter release button is pressed to adjust the white balance.
ƃ Press the button when adjustment is unsuccessful to set again.
ƃ You can set the range to measure white balance when setting manually.
White balance is measured using the entire screen using multi-segment metering (p.129) if [Entire
screen] is selected for [Man. WB Measurement] in [ Custom Setting] menu (p.99). White
Balance is only adjusted in the spot metering area (p.130) if [Spot metering area] is selected.
ƃ If picture is extremely overexposed or underexposed, white balance may not be adjusted. In this
case, set an appropriate exposure and re-adjust the white balance.
INFORMATION