Samsung SWL-3000AP - Manual (Page 73)

69
⑩ You must select “Save and reboot” on [ROOT] menu, after changing the
appropriate parameters by entering the new values.
By selecting the above menu, rebooting will occur automatically. The modified
parameters of the AP will be changed effectively after it is rebooted. After the
rebooting, you will view the following window to ask the password. If no
further changes are needed in your settings, you do not need to enter the
password.
==================================================
Samsung SWL-3300AP Configuration
==================================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Server [Menu]
4. Status [Menu]
5. Load default values
6. Save and reboot
CMD(t,p,h): 6
↵
Select Save and reboot
==================================================
Samsung SWL-3300AP Configuration
==================================================
To configure the Access Point, the password is required.
Enter password :