Sharp AQUOS 10P02-MX-NM - Manual (Page 62)

60
• To attach the stand, perform the above steps in reverse order.
Unfasten the four screws used to
secure the stand in place. Detach the stand from the TV.
1 3
Appendix
Removing the Stand
• Before detaching (or attaching) the stand, unplug the AC cord.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
LC-40LE810UN/LC-46LE810UN/LC-52LE810UN
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
■
• To attach the stand, perform the above steps in reverse order.
LC-60LE810UN
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
■
2
1
Loosen the screw used to secure the stand cover
and remove the cover. 1 Unfasten the four screws used to secure the
stand in place.
2 Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
1 2
2
1 Loosen the screw used to
secure the stand cover.
2 Remove the cover.
1
2