Sharp AQUOS 10P02-MX-NM - Manual (Page 38)

36
3
Press ENTER to start checking the data in the USB
memory device.
Insert the USB memory device
containing the software update file.
OK
4
During the data checking, “Checking” blinks.
Now checking the data
in the USB memory device.
Checking
• The current version of the TV software and the version
of the update fi le on the USB memory device are
displayed. To update the TV software with the update
fi le, select “Yes”, and then press
ENTER.
Example
No Yes
Software update file is detected
in the USB memory device.
Start update?
Current Version
XXXXXXXX
Latest Version
XXXXXXXX
• If the USB memory device is not properly installed or
the correct update fi le cannot be found on the USB
memory device, an error message is displayed.
Check the fi le on the USB memory device, and then
reinsert the USB memory device correctly.
Software update file is not detected
in the USB memory device.
Confirm that you have transferred
the file to the USB memory device
and retry software update.
OK
There is more than one software
file in the USB memory device.
Confirm that only the
software update file is
in the USB memory device.
OK
On-Screen Display Menu
5
Press ENTER to start updating.
OK
Press "OK" to restart the TV
and complete the update.
Wait several minutes and do not
unplug the AC cord.
Example
50%
Now updating
Do not unplug AC cord.
CAUTION
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
6
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Example
Update Version UXXXXXX2
Software update is complete.
• If the update has failed, check the fi le in the USB
memory device and try Software Update again.
Failed to complete update.
Retry Software Update.
If system update fails again,
contact the customer service center.
7
After the screen shown below is displayed, press
ENTER.
OK
System software was
successfully updated.
Remove the USB memory device.
8
Remove the USB memory device.