Smith Corona 100 User Manual

Page 6

C H A N G I N G

Changing The Ribbon Cassette

1) Move the print carrier to the center of the platen using the

SPACE

key.

2) Hold the ribbon cassette on both sides and lift up the front portion (where the

ribbon is exposed) to remove the cassette.

3) To insert a new cassette, place the back end of the cassette on the cassette

holder on the carrier and gently press down on the front of the cassette unit it
clicks into place.

4) Turn the ribbon feed knob counter-clockwise again to take up any slack in the

ribbon.

5) Presss the

CODE

(SETTING) key.

Changing The Print Wheel

1) Move the print carrier to the center of the platen using the

SPACE

key.

2) You will see a lever on the right side of the carrier. Pull this lever toward you and

lift out the daisy wheel.

3) Place the daisy wheel into the slot with the characters facing the platen.
4) Push the lever back into position.

5) Press the

CODE

(SETTING) key.

-5-