Smith Corona 100 - Manual (Page 14)

14
TROUBLE SHOOTING
If any operating difficulties arise, check the list below before returning your typewriter
for service.
1. Typewriter remains at a stand with the - Make sure the power cord is still
power switch set to on. plugged in.
2. Printing is faint or does not appear - Be sure the printwheel and ribbon
cassette have been properly installed.
- Check positioning of the ribbon
cassette.
- Make sure the ribbon has not been
fully used.
3. Corrections cannot be made - Check to make sure the correction
tape has been properly installed.
- Make sure the correction tape has not
been fully used.
- Make sure the correction tape has
been properly selected.
M A I N T E N A N C E
We recommend that your typewriter be adjusted, serviced, and lubricated by a quali-
fied service technician at least once a year. If you need help, contact your local dealer
for checking your machine.
*NOTE: For best performances, try to use only standard supplies from your
dealer. The use of non-standard supplies including Ribbons, Correction
Tapes and Print Wheels, may cause poor performance or damage to
your typewriter.
- Please, store your typewriter in a location protected from extreme temperatures and
humidity.
- Be sure to unplug the typewriter before cleaning and lifting it.
- If you’d like to clean your typewriter, use a mild soap to remove stains. Never use
detergents, volatile liquids, treated cloths, harsh cleaning agents or sprays.
- Never attempt to disassemble your typewriter by yourself. Repairs should only be
made by an authorized service technician.
-13-