SRS Labs Projector 8953H - Manual (Page 82)

82
4.1 Configuring and controlling the projector via a web browser (Continued)
4. Management with Web browser software
Item Description
Image
Aspect Selects the aspect setting.
Over Scan Adjusts the over scan setting.
V Position Adjusts the vertical position.
H Position Adjusts the horizontal position.
H Phase Adjusts the horizontal phase.
H Size Adjusts the horizontal size.
Auto Adjust Execute Performs the automatic adjustment.
Input
Progressive Selects the progressive setting.
Video NR Selects the video noise reduction setting.
3D-YCS Selects the 3D-YCS setting.
Color Space Selects the color space.
Component Selects the COMPONENT port setting.
C-Video Format Selects the video format setting.
S-Video Format Selects the s-video format setting.
HDMI Selects the HDMI setting.
Frame Lock-RGB1 Turns the frame lock-RGB1 function on/off.
Frame Lock-RGB2 Turns the frame lock-RGB2 function on/off.
Frame Lock-HDMI Turns the frame lock-HDMI function on/off.
RGB in-1 Selects the RGB1 input signal type.
RGB in-2 Selects the RGB2 input signal type.
Setup
Auto Keystone
Execute
Performs the automatic keystone distortion setting.
Keystone V Adjusts the vertical keystone distortion setting.
Keystone H Adjusts the horizontal keystone distortion setting.
Whisper Selects the whisper mode.
Mirror Selects the mirror status.
Monitor Out-RGB1 Assigns the RGB OUT when the RGB1 input port is selected.
Monitor Out-RGB2 Assigns the RGB OUT when the RGB2 input port is selected.
Monitor Out-HDMI Assigns the RGB OUT when the HDMI input port is selected.
Monitor Out-MIU Assigns the RGB OUT when the MIU input port is selected.
Monitor Out-
Component
Assigns the RGB OUT when the COMPONENT input port is
selected.
Monitor Out-S-Video Assigns the RGB OUT when the S-VIDEO input port is
selected.
Monitor Out-Video
Assigns the RGB OUT when the VIDEO input port is
selected.
Monitor Out-Standby Assigns the RGB OUT in the standby mode.