SRS Labs Projector 8953H User Manual
Page 12
12
2. Equipment connection and network setting
2.3 Manual network connection setting - Wired LAN - (continued)
7) Set IP address, subnet mask and default gateway for PC.
Fig. 2.3.2.d “Internet Protocol (TCP/IP) Properties” window
5) Open “Local Area Connection Properties” window you use for network device.
(Fig. 2.3.2.c)
6) Set used protocol as “TCP/IP” and open “Internet Protocol (TCP/IP) Properties”
window.
Fig. 2.3.2.c “Local Area Connection Properties” window