SRS Labs Projector 8953H - Manual (Page 43)

43
All setting for the network connection between
the projector and PC is input manually.
Select [Configure Network Settings
Manually].
3.5.3 Configuring manually
3.5 Manual configuration (continued)
The information to be input manually is different, depending on how you want to
connect the projector and PC.
• Direct connection between the projector and PC (AdHoc mode). (44)
• The projector connected to an access point by a LAN cable. (45)
• The projector connected to an access point by the wireless LAN. (46)
If you use the wired LAN, go to (47).
Wired LAN
The required information depends on how you connect the projector and PC.
Wireless LAN
3. Using the Live Mode