Samsung 323T - Manual (Page 50)

User control buttons
| Remote Control Buttons |
For more information on the screen adjustment functions, refer to On-Screen Display .
The performance of the remote control may be affected by a TV or other electronic devices operated
near the monitor, causing malfuction due to interference with frequency.
1. Power
2. AUTO
3. MUTE
4. VOL(Volume)and Up/Down buttons
5. SOURCE
6. Number buttons
7. PIP
8. SIZE
9. P.SIZE
10. STILL
11. DISPLAY
12. SLEEP
13. MENU
14. EXIT
15. SWAP
16. LOCATE
1. Power
Use this button for turn the monitor on and off.
2. AUTO
Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are
adjusted automatically.
To make the automatic adjustment function sharper, execute the 'AUTO' function while the
AUTO
PATTERN is on. (Press here to view an animation about Auto Adjustment.)
3. MUTE
Pauses (mutes) the audio output temporarily. The audio resumes if Mute or Volume button is
pressed in the Mute mode.
4. VOL(Volume)and Up/Down buttons
Press to increase or decrease the volume. (Also used to make selections on the on-screen
menus.)
5. SOURCE
Press to display all of the available video sources.
6. Number buttons
In the MDC program, press the numbers to set an ID.
7. PIP
Every time you push the button, the PIP window's signal source changes.