SIIG 133 - Manual (Page 8)

8
Windows 2000 Driver Installation
For New Windows 2000 Systems
1. Follow Microsoft procedures to install Windows 2000
accordingly.
2. At the Windows Set-up screen, press F6 to specify and add
the driver.
3. Insert the Driver diskette. Press S, then press Enter.
4. Select SIIG CN2487 UDMA133 IDE Win2000 Miniport
Driver and press Enter.
5. Press Enter to continue and follow on-screen instructions to
complete installation.
For Existing Windows 2000 Systems
1. Boot up Windows 2000.
2. At the Found New Hardware Wizard, click Next.
3. Select Search for a suitable driver for my device
(recommended) and click Next.
4. Insert the Driver diskette into the floppy drive, check Specify
a location , uncheck the other boxes, click Next, type in
A:\Win2000 . Click OK and then Next to continue.
5. If the Digital Signature Not Found message appears, click
Yes .
Note If prompted for Windows 2000 CD-ROM, insert the CD
and click OK. Type in D:\I386, click OK and Finish. (assuming
D:
is your CD-ROM drive)
6. Click Finish, remove the Driver diskette and click Yes to
restart Windows to complete driver installation.
Windows XP Driver Installation
For New Windows XP Systems
1. Follow Microsoft procedures to install Windows XP
accordingly.
2. At the Windows Set-up screen, press F6 in order to specify
and add the driver.
3. Insert the Driver diskette. Press S then press Enter.