Schumacher Automatic /Maintainer SP2 - Manual (Page 9)

• 9 •
9. FEATURES
1 2
3
4 5
6
1. AC POWER (red) LED
2. CHARGING (yellow) LED
3. CHARGED (green) LED
4. Battery Clip Cable Assembly
5. Ring Terminal Cable Assembly
6. Quick-Connect Connector
10. ASSEMBLY INSTRUCTIONS
Remove all cord wraps and uncoil the cables prior to using the
battery charger.
11. CONTROL PANEL
LED Indicators
AC POWER (red) LED lit: Indicates that there is AC power
supplied to the battery charger.
CHARGING (yellow) LED lit: Indicates the charger is
charging the battery.
CHARGING (yellow) LED flashing: Indicates the charger is
in abort mode.
CHARGED (green) LED lit: Indicates the battery is fully
charged and the charger is in maintain mode .
CHARGED (green) LED blinking: Indicates the battery is at
80% of charge or higher .