beautypg.com

Schumacher Automatic /Maintainer SP2 User Manual

Page 5

background image

• 5 •

2.8 Wear complete eye and body protection, including safety goggles

and protective clothing. Avoid touching your eyes while working

near the battery.

2.9 If battery acid contacts your skin or clothing, immediately wash

the area with soap and water. If acid enters your eye, immediately

flood the eye with cold running water for at least 10 minutes and

get medical attention right away.

2.10 If battery acid is accidentally swallowed, drink milk, the whites of

eggs or water. DO NOT induce vomiting. Seek medical attention

immediately.

3. PREPARING TO CHARGE

RISK OF CONTACT WITH BATTERY

ACID. BATTERY ACID IS A HIGHLY

CORROSIVE SULFURIC ACID.

3.1 If it is necessary to remove the

battery from the vehicle to charge it, always

remove the grounded terminal first. Make

sure all of the accessories in the vehicle are off, to prevent arcing.

3.2 Be sure the area around the battery is well ventilated while the

battery is being charged.

3.3 Clean the battery terminals before charging the battery. During

cleaning, keep airborne corrosion from coming into contact

with your eyes, nose and mouth. Use baking soda and water to

neutralize the battery acid and help eliminate airborne corrosion.

Do not touch your eyes, nose or mouth.

3.4 Add distilled water to each cell until the battery acid reaches the

level specified by the battery manufacturer. Do not overfill. For

a battery without removable cell caps, such as valve regulated

lead acid batteries (VRLA), carefully follow the manufacturer’s

recharging instructions.

3.5 Read, understand and follow all instructions for the charger,

battery, vehicle and any equipment used near the battery and

charger. Before charging, study all of the battery manufacturer’s

specific precautions and recommended rates of charge.

3.6 Determine the voltage of the battery by referring to the vehicle

owner’s manual and make sure that the output voltage is correct.

3.7 Make sure that the charger cable clips make tight connections.