Sony SAT-A55 - Manual (Page 25)

25
Using
the
O
n
-S
creen
D
isplays
Entering Your Antenna Location
The Antena Location pop-up helps you or your professional installer aim
your Satellite Dish Antenna based on your zip code or your latitude and
longitude location.
1 Highlight and select “Antenna Location” from the
Antenna display.
The Antenna Location pop-up appears.
2 Select “Zip Code”.
The Zip Code pop-up appears.
3 Enter your Zip Code, then select “OK”.
If you have a Round Satellite Dish Antenna, you or your
professional installer can use the azimuth and elevation readings
to aim the antenna. If you have an Oval 2-Sat or Oval 3-Sat Satellite
Dish Antenna, you or your professional installer can use the
azimuth, elevation and tilt readings to aim the antenna.
z Tip
If it is more convenient for you to
enter latitude and longitude, select
“Latitude & Longitude” instead of
“Zip Code”.
To change
the number
To move to the
next digit
OK
Closes the pop-up and
saves your changes.
Cancel
Closes the pop-up
without saving the
changes. m
M
< ,
Note
Round Satellite Dish Antennas do not
have a Tilt setting.