Sonance Sonamp 875D SE - Manual (Page 2)

Specifications:
Number of Channels: 8 (four stereo pairs)
Output Power (Stereo): 75 watts RMS per channel (X8),
0.25% THD, 20Hz - 20kHz, @ 8 ohms
140 Watts per channel (X8),
0.1% THD, 1kHz, @ 4 ohms
Output Power (Bridged): 300 Watts per channel (X4) @ 8 ohms
Frequency Response: 20Hz – 20kHz, ±1dB
Total Harmonic Distortion: 0.05% (1kHz, 8 ohms)
0.10% (1kHz, 4 ohms)
Signal to Noise Ratio: -96dB (w/22kHz filter)
Input Sensitivity: 1.5V for 75W RMS Output;
1.3V w/BBE ON (+6dB)
1.0V w/BBE ON (+9dB)
Input Impedance: 10k ohms
Maximum Source
Input Voltage:
4.0 VAC RMS
3.0 VAC RMS w/BBE ON
Loop Output
Impedance (Buf fered): 100 ohms
Serial Protocol
(RS-232 Connection):
9600, N, 8, 1, single CR
Power Consumption: 1,200 Watts
BTU/HR: 850
AC Fuse: 10A (T10AL ~ 250V)
Dimensions (W x H x D): 16½” x 3 7
/
8
” x 17¼”
(419mm x 98mm x 438mm)
Dimensions 16½” x 3 7
/
8
” x 17¼”
(w/Rack Ears, WxHxD): (419mm x 98mm x 438mm)
Shipping Weight: 47 lbs (21.4kg)
©2007 Sonance. All rights reserved. Sonance and Sonamp are registered trademarks of Dana Innovations.
“BBE” is a registered trademark of BBE Sound, Inc. Digital Power Processing is a registered trademark of Tripath Technology, Inc.
Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product specification information visit our website:
www.sonance.com
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Suppor t: (800) 582-0772
WWW.SONANCE.COM
06/07
Sonamp ® Power Amplifiers
875D SE Amplifier